All in one, plug and play.
The Green-X (GCS-1) is a state-of-the-art, modular control system designed to manage irrigation, climate control, CO₂ detection, lighting, and advanced sensor integration in greenhouses. Built on a local RS485 bus + AWS IoT cloud architecture, it provides millisecond-level data acquisition and remote supervision — entry-level pricing with pro-level capability.
Climate Control
Replace timers with data-driven automation. The GCS-1 reads real-time sensor data from the MBS-GH 4-in-1 (temperature, humidity, CO2, light) and MBS-WS outdoor weather station, then automatically adjusts vents, curtains, fans, and HVAC to maintain your setpoints. Day/night profiles with differential control eliminate manual adjustments.
Key Modules: MBS-GH 4-in-1 Sensor, MBS-WS Weather Station, AMC-1 Motor Controller, DMC-1 Roll-Up Motor Controller, 4RS-2 Device Station
Irrigation Control
Precision fertigation based on real-time substrate data. The GCS-1 reads WCS-3 water content sensors and triggers irrigation cycles only when needed — not on a blind timer. Digital flow meters (DFM-1) provide exact usage tracking. Supports drip, flood, and ebb-and-flow with up to 8 irrigation hubs.
Key Modules: WCS-3 Water Content Sensor, DFM-1 Digital Flow Meter, DSP-1 Pump Station, DSD-1/DSV-1 Valve Modules, WD-1 Leak Detector
Lighting Control
Two independent lighting channels (LINE 1 & LINE 2) let you control different fixture types or spectral zones simultaneously. Operate in POWER mode (fixed output) or AUTO mode (PPFD target with real-time sensor feedback from MBS-PAR). Built-in sunrise/sunset simulation gradually ramps intensity to reduce plant stress. Compatible with most LED and HID fixtures via the LMA-14 adapter.
Key Modules: LMA-14 Lighting Adapter, MBS-PAR Quantum Sensor, LINE 1 & LINE 2 Dual Channel
Remote Management
Monitor and control your greenhouse from anywhere. The GCS-1 connects to AWS IoT for secure cloud access via the TM+ Pro mobile app. Real-time dashboards show all sensor readings and equipment status. Push alerts notify you of out-of-range conditions. OTA firmware updates keep your system current without on-site visits.
Key Modules: AWS IoT Cloud, TM+ Pro App (iOS/Android), Device Shadow, OTA Updates
Key Specifications
| Specification | Value |
|---|---|
| Controller Model | GCS-1 |
| System Architecture | Local RS485 bus centralized control + AWS IoT cloud remote supervision |
| Display | Backlit LCD touch screen |
| Sensor Capacity | Climate 1pc, PAR 1pc, Smoke 1pc, Weather Station 1pc, Substrate WCS-9 1pc+4 nodes, Nutrients AMP-3 1 set, Flow Meter 1pc, Water Detector 2pc |
| Device Capacity | Temp/Humid/CO₂/Program: 8pcs each (shared bus), Motor: 3pcs, Irrigation: 8pcs (192 outputs), EC Fan: 4pcs |
| Light Channels | 2 (LINE1 & LINE2) — dual-channel, temp-based dimming, sunrise/sunset simulation |
| Lighting Compatibility | Most LED & HID fixtures via LMA-14 / LMA-14G adapters; ThinkGrow full LED line |
| Motor Control | AMC-1 Single/Three Phase AC motors (curtains), DMC-1 24V DC motors (roll-up vents) — up to 4 units |
| Irrigation Control | Moisture-based, crop-steering, feed-by-volume; solenoid valves, pumps via DSP-1 / DSV-1 / OA6-24 / OAT-24 / OA6-110 |
| EC Fan Control | EFC-1: 4× 0-10V / PWM fans, 7 control modes; FRC-1/2 Aero Fan adapter |
| Remote Access | TM+ Pro app (free, no subscription) — iOS & Android, AWS IoT MQTT + Device Shadow + OTA |
| Connectivity | RJ12 plug-and-play, all sensors & devices daisy-chainable |
| Firmware | V_1.3, upgradable via MicroSD (≤32GB) |
| Starter Kit MSRP | includes GCS-1 controller + MBS-GH 4-in-1 sensor |
Configuration Comparison
| Specification | FeatureGCS-1 | ||
|---|---|---|---|
| Controller Model | GCS-1 | ||
| Best For | Greenhouse growers — vegetables, flowers, nurseries | ||
| Sensor Support | Climate (4-in-1), PAR, CO₂, Weather Station, Smoke, Water, Substrate (4 nodes), Nutrients (pH/EC), Flow Meter | ||
| Device Control | Temp / Humidity / CO₂ / Program modules — 8pcs each | ||
| Motor Control | AMC-1 AC curtain motors + DMC-1 24V DC roll-up vents — up to 4 units | ||
| Irrigation | 8 hubs, 192 outputs — solenoid valves, pumps, moisture-based triggering, feed-by-volume | ||
| Lighting | Dual-channel (LINE1/LINE2) — PWM 0-10V, Auto PPFD, temp-based dimming, sunrise/sunset | ||
| EC Fan Control | 4× 0-10V / PWM fans — 7 control modes | ||
| Remote Access | TM+ Pro app (iOS & Android, free) — AWS IoT cloud, MQTT, OTA firmware | ||
| Connectivity | RJ12 plug-and-play — all sensors & devices daisy-chainable on RS485 bus | ||
| Starter Kit | includes GCS-1 controller + MBS-GH 4-in-1 sensor |
Optional Modules
